Nightstands construction

This is the beginning stages of my nightstand. Right now I am only building one to make sure I have all of my ducks in a row. Like my previous piece, the bench for the hallway, I have ripped down 1 inch strips of furniture grade plywood and stood them on edge then glued and clamped them together. I alternated the strips, 20 inch and 18 inch strips, to build individual panels, i.e. the sides, top and bottom, so they will interlock with each other when assembled.



Below I have started the base assembly notching and interlocking four 4 inch strips and attaching them to the base. After a night of letting the glue set I will join all of the pieces together and begin the drawer assembly.

Peeps

I love this photo from 20x200. It's called "Peeps" of course, by Katie Baum.
You can get it right here.

puti trees

I'm loving these prints by Nod Young a designer based in Beijing.
These are titled "the puti trees" and are an interpretation of 2 poems from the original zen classic. I found these on printpattern, but you can buy them here.

I'm still on the lookout for art work for our dining room. Could these be the solution? I have it in my head that a painting needs to go there, but maybe a few prints instead...

elephant print

Brandon just saw this print on trays and glasses at IKEA. I'm madly in love with it. I wish they had it in fabric. I would use if for a cushion. I want Brandon (carpenter) to make a long shelf for the bedroom for my yoga books. I'd like to paint it white and put a cushion or pillows on top. If anyone has seen this in fabric form, let me know.

Base! How low can you go?

The base of the new bench has been assembled and I am currently working on the platform for shoes located beneath the bench top. Above is a pic of the base in construction. I utilized my previous method for construction with pegs and glue. I seem to be adverse to using anything but wood and glue. The legs are 18" high each and I used a regular handsaw and 3/4" chisel to notch out the tops to slide the 1"x 2" piece of oak through with 2 pegs each. Previously when drilling the 1/4" holes for the 1/4" pegs I used a regular drill bit but this time I decided to use a 1/4" spade bit instead. My reasoning was that with the drill bit the pegs were very snug and difficult to insert so I went with the spade bit which bores out the holes. It made it very easy for the pegs to slide in and a bit loose making the base not as solid or stable. I adjusted and learned my lesson. No more spade bits. Tomorrow I'll post the pics of the next phase of the bench assembly. Thanks and check back soon.

Which way to go?

I've begun building the bench for our hallway. Above you'll find the top which I have already assembled and still planing down. Inspired by several designs I've come across but still wanting to continue and push my own design from the previous benches I built (see dining room), this top is a new direction for me. Purchasing a 4' x 8' sheet of oak plywood for $45, I ripped it down in 8' x 1 1/4" inch strips. I stood the strips up in a jig I built (retrofit the previous jig) and glued the strips together, clamping as I go. A good couple hours of sanding with a course grit sandpaper on a belt sander and then a little while with the fine grit on the palm sander should smooth this bench top like glass. With the left over ply wood I am utilizing the same technique and building smaller boards for shoe cubbies underneath. The striations will go in the opposite direction though. I love the lines.

bench coming soon

This is the area that Carpenter is referring to. Our entryway has a narrow jog in the wall that makes it perfect for a long bench.

Carpenter has actually started building the bench and will hopefully start posting photos soon. (hint hint)



The coat hooks are great for visiting guests and dog leashes...
You can have your very own here.